Skip to main content: EOS FORMIGA 100 / 110 / 110 Velocis – Small, but powerful!

EOS FORMIGA P100 / P110 / P110 Velocis
Small, but powerful!

EOS FORMIGA – economical laser sintering of polyamide, polypropylene and rubber parts with amazing precision. This allows the customers of 1zu1 to benefit from even more accurate 3D printing processes for rapid prototyping and additive manufacturing.

The resulting components are not only suitable for use as prototypes: a layer thickness of 100 µm and a laser focus of 0.45 mm ensure outstanding part accuracy. This makes the term “additive manufacturing” live up to its meaning: Why? Now, economical production of small batches and individualized products with complex geometries is possible in the shortest possible time. A total of ten SLS systems are available at 1zu1. Five of these are Formigas.

Technical innovations behind the EOS Formiga

  • Extremely small laser focus (>0.45 mm) enables an exact wall thickness of only 0.45 mm
  • Maximum surface quality with vertical walls
  • Precise and consistent component accuracy through accurate temperature measurement and fast heating control in the plant
  • Low layer thickness of 100 µm
  • High productivity
  • Optimum stability and functionality for film hinges
  • Excellent “snap and fit” function for assemblies

FORMIGA materials

  • EOS FORMIGA P100: rubber
  • EOS FORMIGA P110: PA2200, PA3200-GB and PP
  • EOS FORMIGA P110 Velocis: PA2200, PA3200-GB

Strength through detail

The particular strength of FORMIGA systems lies above all in the details: a fine laser spot makes it possible to produce structural layers of only 100 µm and wall thicknesses of only 0.45 mm “thickness”. With dimensions this small, the layers virtually disappear. What's more, the extreme contour fidelity of the Formiga systems creates surfaces that appear almost smooth to the naked eye.


EOS FORMIGA P110

  • System construction space: 200 x 250 x 330 mm (L/D/H)
  • Construction layers: 100 µm
  • Wall thickness: 0.45 mm
  • Precise and low-warpage components through thermal management

EOS FORMIGA P110 Velocis

  • System construction space: 200 x 250 x 330 mm (L/D/H)
  • Construction layers: 100 µm
  • Wall thickness: 0.45 mm
  • Improved heating and software control for preheating of the material
  • Better heat management for more accurate and low-warpage components
  • Even more homogeneous component quality

FAQ

EOS P100 FORMIGA was the world's first series production system of this type.

  • As a pioneer in our field, we at 1zu1installed this innovative technology as early as May 2007.
  • The next development stage P110 has been in operation since 2013.
  • In 2018, the P110 Velocis generation was added to the 1zu1 production range.
  • The Fine Detail Resolution (FDR) technology followed in 2020.

Other SLS systems

Place your order in just a few steps
You can do this with 1zu1direkt

Configure

Technology choice, material, color, surface structure…

Get started now

Data transfer

Upload 3D file, top priority for secrecy

 

Consulting

Analysis, coordination, advice on possible alternatives…

 

Personalized quote

promptly delivered, personalized and perfectly adapted quote

 

Immer Informiert bleiben

Sichern Sie sich einen Wissensvorsprung! Mit dem 1zu1 Newsletter erhalten Sie spannende Neuigkeiten, Informationen zu Messen und Veranstaltungen, zum Produktprogramm und zu besonderen Angeboten.